Home » Tire Pressures by Car » Toyota » Mr2 » Toyota Mr2 Tire Pressure

Toyota Mr2 Tire Pressure

You can find below the recommended tire pressure(s) for Toyota Mr2 by model year or its original equipment tire size. To enjoy enjoy a safe and comfortable drive, keep your Toyota Mr2 tires properly inflated at all times to enjoy a safe and comfortable drive.

— Select Year —

Toyota Mr2 1990

Front Tire Size Front Tire Pressure Rear Tire Size Rear Tire Pressure
195/55/R15 V 85 30 PSI/2.1 Bar 195/55/R15 V 85 0 PSI/0 Bar

Toyota Mr2 1991

Front Tire Size Front Tire Pressure Rear Tire Size Rear Tire Pressure
195/55/R15 V 85 30 PSI/2.1 Bar 195/55/R15 V 85 0 PSI/0 Bar

Toyota Mr2 1992

Front Tire Size Front Tire Pressure Rear Tire Size Rear Tire Pressure
195/55/R15 V 85 30 PSI/2.1 Bar 195/55/R15 V 85 0 PSI/0 Bar

Toyota Mr2 2003

Front Tire Size Front Tire Pressure Rear Tire Size Rear Tire Pressure
PSI/ Bar PSI/ Bar

Toyota Mr2 2004

Front Tire Size Front Tire Pressure Rear Tire Size Rear Tire Pressure
PSI/ Bar PSI/ Bar

Toyota Mr2 2005

Front Tire Size Front Tire Pressure Rear Tire Size Rear Tire Pressure
PSI/ Bar PSI/ Bar

Toyota Mr2 2006

Front Tire Size Front Tire Pressure Rear Tire Size Rear Tire Pressure
PSI/ Bar PSI/ Bar
Disclaimer: Always consult your vehicle handbook for your exact recommended pressures. All listed data on whatsthepressure.com and/or calculations are for informational purposes only. whatsthepressure.com does not warrant or make any representations regarding the accuracy of or the results of the use of this information.

What is the correct tire pressure for Toyota Mr2?

The recommended tire pressure for Toyota Mr2 tires is 30 psi to ;; psi, set by Toyota and based on model’s original equipment tire size to optimize vehicle performance, fuel efficiency and safety.

 

Where do I find the recommended tire pressure for Toyota Mr2 ?

Toyota Mr2 recommended tire pressure can be found on a tire placard on the side of driver’s door or door jam, on the fuel door or in the owners manual. Tire inflation will be listed in psi (pounds per square inch), bar or kPa (kilopascals).

 

How to check your Toyota Mr2 tire pressure?

Checking regularly all tires on your Toyota Mr2, including your spare tire, once a month or before a long trip is recommended. Tires have been known to lose up to 1psi (0.06 bar) every month.

  1. Purchase a trusted tire pressure gauge.
  2. If possible check the pressure on your tires “cold” – before you’ve driven or at least three hours after you’ve driven.
  3. Insert tire pressure gauge into the valve stem on your tire.  When you hear a “psst” sound that’s air escaping the tire. (The escaping air shouldn’t affect pressure substantially, unless you hold down the air pressure gauge too long.)
  4. Compare the measured psi to the psi found on the sticker inside the driver’s door of your vehicle, in the Toyota owner’s manual or sometimes Inside the fuel cap. DO NOT compare to the psi on your tire’s sidewall.
  5. If your psi is above the number, let air out until it matches. If below, add air until it reaches the proper number.

Over inflated and under inflated tires suffer more damage than those with the correct pressure and need to be changed more often. Vehicles with under-inflated tires have increased rolling resistance that requires more fuel to maintain the same speed.